|
|
|
Single gunmetal Silversilk Capture end cap with loop has room for 1 strand of chain. Silversilk Capture end caps are custom designed with grooves inside to lock to the ball chain in place so you can easily create beautiful jewelry. Use a Nylon Jaw Pliers to close the end cap so the sides are flush. End caps are 9mm in length and 5mm wide with a 2mm loop. Sold individually.
|
|
|
|
8mm antique copper smooth pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 5.5mm opening and 2mm hole size. Sold individually.
|
|
|
|
8mm gold-plated smooth pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 5.5mm opening and 2mm hole size. Sold individually.
|
|
|
|
8mm antique brass-plated smooth pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 5.5mm opening and 2mm hole size. Sold individually.
|
|
|
|
8mm gunmetal-plated smooth pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 5.5mm opening and 2mm hole size. Sold individually.
|
|
|
|
11mm antique silver-plated hammered pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 9mm opening and 4mm hole size. Sold individually.
|
|
|
|
11mm antique copper-plated hammered pewter end cap. Use to finish off the ends of round braids by stringing a headpin into the braid and passing it through the hole of the cap, then creating a loop. You can also use to finish multi-strand jewelry or as a bead cap. Shaped like a tube with a dome on the end. 9mm opening and 4mm hole size. Sold individually.
|
|
|
|
Regaliz Antique brass pewter magnetic clasp for licorice leather. Connected clasp is 24mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
Regaliz Antique copper pewter magnetic clasp for licorice leather. Connected clasp is 24mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
Regaliz Antique silver straight end clasp for licorice leather. Clasp is 15mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 end cap clasp pieces, does not include jump rings or toggle. Sold as 1 set.
|
|
|
|
Regaliz Antique copper straight end clasp for licorice leather. Clasp is 15mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 end cap clasp pieces, does not include jump rings or toggle. Sold as 1 set.
|
|
|
|
Regaliz Antique copper V end clasp for licorice leather. Clasp is 15mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 end cap clasp pieces, does not include jump rings or toggle. Sold as 1 set.
|
|
|
|
20mm gold plated Miyuki findings end tube. A great way to finish off your Delica stitch designs. Simply slide the tube onto the last row of stitches, crimp both ends down using a chain nose pliers to secure in place, and add a clasp. Works with size 11/0 Delica seed beads. Sold individually.
|
|
|
|
15mm gold plated Miyuki findings end tube. A great way to finish off your Delica stitch designs. Simply slide the tube onto the last row of stitches, crimp both ends down using a chain nose pliers to secure in place, and add a clasp. Works with size 11/0 Delica seed beads. Sold individually.
|
|
|
|
15mm silver plated Miyuki findings end tube. A great way to finish off your Delica stitch designs. Simply slide the tube onto the last row of stitches, crimp both ends down using a chain nose pliers to secure in place, and add a clasp. Works with size 11/0 Delica seed beads. Sold individually.
|
|
|
|
Antique silver magnetic striped double clasp for licorice leather. Connected clasp is 23mm long; end cap hole is 20x7mm for a perfect fit for 2 strands of licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
2x2mm antique copper crimp tube by TierraCast. These lead-free pewter crimp tubes are made with high quality metals. Made right here in the USA! Sold individually.
|
|
|
|
Regaliz Antique silver small magnetic clasp for licorice leather. Connected clasp is 18mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
Regaliz Antique brass small magnetic clasp for licorice leather. Connected clasp is 18mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
Regaliz Antique copper small magnetic clasp for licorice leather. Connected clasp is 18mm long; end cap hole is 10x7mm for a perfect fit with the licorice leather. Set includes 2 clasp pieces. Sold as 1 set.
|
|
|
|
11x16mm antique copper rock and roll strap tip by TierraCast. An exciting and polished way to finish off a project. Use rivets to attach the strap tip to leather, suede, etc. and attached a clasp. Loop measures 3.5mm and hole for rivet measures 2.5mm. Lead-free pewter tips are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
11x16mm gold rock and roll strap tip by TierraCast. An exciting and polished way to finish off a project. Use rivets to attach the strap tip to leather, suede, etc. and attached a clasp. Loop measures 3.5mm and hole for rivet measures 2.5mm. Lead-free pewter tips are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
11x16mm brass oxide rock and roll strap tip by TierraCast. An exciting and polished way to finish off a project. Use rivets to attach the strap tip to leather, suede, etc. and attached a clasp. Loop measures 3.5mm and hole for rivet measures 2.5mm. Lead-free pewter tips are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
11x16mm antique silver rock and roll strap tip by TierraCast. An exciting and polished way to finish off a project. Use rivets to attach the strap tip to leather, suede, etc. and attached a clasp. Loop measures 3.5mm and hole for rivet measures 2.5mm. Lead-free pewter tips are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
10x19mm antique copper distressed slide with loop by TierraCast. An exciting and polished way to finish off a project. Use rivets to loop leather through to make a bracelet, use as a slide and dangle a charm from the loop, or create dangle earrings with leathers. The possibilities are endless. Lead-free pewter slides are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
10x19mm gold distressed slide with loop by TierraCast. An exciting and polished way to finish off a project. Use rivets to loop leather through to make a bracelet, use as a slide and dangle a charm from the loop, or create dangle earrings with leathers. The possibilities are endless. Lead-free pewter slides are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
10x19mm brass oxide distressed slide with loop by TierraCast. An exciting and polished way to finish off a project. Use rivets to loop leather through to make a bracelet, use as a slide and dangle a charm from the loop, or create dangle earrings with leathers. The possibilities are endless. Lead-free pewter slides are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
10x19mm antique silver distressed slide with loop by TierraCast. An exciting and polished way to finish off a project. Use rivets to loop leather through to make a bracelet, use as a slide and dangle a charm from the loop, or create dangle earrings with leathers. The possibilities are endless. Lead-free pewter slides are made with high quality metals right here in the USA! Sold individually.
|
|
|
|
3mm sterling silver crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2x2 crimps or smaller. Sold individually.
|
|
|
|
3mm silver plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
3mm gold plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
3mm Copper plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
3mm Copper Crimp Bead Covers
Code: Z008686
Price: $5.49
Sold individually.
As low as $4.94 per bag.
|
|
Volume Discounts |
|---|
|
|
|
|---|
|
1-4 | $5.49 |
|
5-9 | $5.22 |
|
10+ | $4.94 |
|
|
|
3mm Copper crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
3mm black oxide crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
3mm antique silver plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
3mm antique brass plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
4mm Gold plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
4mm Copper plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
4mm Copper Crimp Bead Covers
Code: Z008725
Price: $3.99
Sold individually.
As low as $3.59 per bag.
|
|
Volume Discounts |
|---|
|
|
|
|---|
|
1-4 | $3.99 |
|
5-9 | $3.79 |
|
10+ | $3.59 |
|
|
|
4mm Copper crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 100 pieces per bag.
|
|
|
|
4mm Black oxide crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
4mm Antique silver plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
4mm Antique brass plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
4mm Antique copper plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 3x2mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
5mm Silver plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 4mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
5mm Gold plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 4mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
5mm Copper plate crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 4mm crimps or smaller. Sold 144 pieces per bag.
|
|
|
|
5mm Black oxide crimp bead cover. Clamp-on style crimp covers are used to cover crimps or knots. Fits over 4mm crimps or smaller. Sold 144 pieces per bag.
|
